Products - Masonry Blocks

(ABMCO) BLOCKS has acquired matured experience and successfully tacked all technical aspects as well as economical factors of clients to provide full proof blocks than any other block.

All materials used for manufacturing (ABMCO) BLOCKS are scientifically selected for the ultimate best performance of (ABMCO) BLOCKS.

The binding media is sulphate resisting cement,which is being procured from avery selected cement local factory and same enable (ABMCO) BLOCKS to withstand the probable sulphate attack from the ground water and other sources.

Fine and course aggregate from lime stone quarry is used to provide high strength and durability to
(ABMCO) BLOCKS because of its inert state and absence of organic matters,salt,shells etc.like sea sand.

The concrete manufactured for
(ABMCO) BLOCKS is from predetermined and controlled mixture of cement,aggregate and water to eliminate the chance of human error ,the (ABMCO) BLOCKS are moulded in highly sophisticated and automatically operated press to provide uniform density and strength.

(ABMCO) BLOCKS masonry wall needs thinner plaster because of
eveness of block and this feature save considerable materials
for masonry and high productivity per mason.

(ABMCO) BLOCKS provides good surface key to plaster due to use
of stone aggregate to assure cracking and crazing of plaster.


(ABMCO) BLOCKS is like are rock the crushing strength of latest
tested block is complies to the requirement of British Standard.

(ABMCO) BLOCKS are imprevious and so protects interior paints and wall finishing from disfiguring.

(ABMCO) BLOCKS allows to liminate damp proof course against the sub-soil water due to its dense structure.

Particulars

Type

Hollow 8(20x20x40 cm )

Block with formed holes for walls

Hollow 6( 15x20x40cm )

Block with formed holes for walls

Hollow 4( 10x20x40cm )

Block with formed holes for walls

Solid 8(20x20x40 cm )

Block with no formed holes for roof

Solid 6( 15x20x40cm )

Block with no formed holes for roof

Solid 4( 10x20x40 cm)

Block with no formed holes for roof

Hourdi20( 20x20x38x42cm )

Block with formed holes for ground

Hourdi25( 25x20x38x42cm)

Block with formed holes for ground

Hourdi30(30x20x38x42 cm)

Block with formed holes for ground

Hourdi35( 35x20x38x42cm)

Block with formed holes for ground

Insulated H8(20x20x40 cm)

Block with formed holes & insulated with polystyrene for walls

Insulated H10(25x20x40 cm)

Block with formed holes & insulated with polystyrene for walls

Other Products

Cement & Light Weight Blocks
Cement Works


 

 


© 2004 Al Amaar Block Manufacturing Co. LLC :: All Rights Reserved :: Site Designed by Techno-Sites